Without an iota of doubt, Google Chrome is by far the most loved browser across platforms. What gives it an edge over rivals is the deep integration with the G-Suite and a massive library of extensions that let you amp customization to your heart’s liking. Not to mention, it’s also more feature-rich than any other browsers out there.
As for the downside, Chrome has long been a resource-hungry browser. Hence, if you fail to take control of this browser, it will not only make your system rather sluggish but also trigger the battery drain. In order to mitigate this loophole, Google has introduced “Memory Saver” to let you cut down RAM/CPU usage. Read on to learn how to enable Memory Saver in Google Chrome on Mac and Windows PC to decrease RAM/CPU usage.
How to Activate Google Chrome’s Energy Saver and Whether or Not It Helps in Freeing Up Memory
Before running through the quick steps, let’s answer a couple of important questions. So, how do you activate the Energy Saver in Google Chrome? Well, this feature is a bit under wraps, therefore you will need to dig deep to unravel it.
Interestingly, it requires you to relaunch the browser multiple times to implement the change. Talking about the impact, the Energy Saver works reliably. It smartly frees up memory from the passive tabs in order to allow the active tabs and other apps on your computer to have the needed memory to work without any sluggishness.
The feature automatically makes the passive tabs active again when you start using them. Hence, you can count on this feature to prevent Chrome from gobbling up a ton of resources.
Turn On Energy Saver in Google Chrome on Mac and Windows PC
Make sure your computer is running the latest version of Chrome. If the browser is not updated, be sure to do it without fail.
1. First off, open Chrome on your Mac or Windows.
2. After that, paste the below-given address in the address bar to reveal the Chrome Flags:
3. Now, click on the drop-down menu that shows right next to Enable the High-Efficiency Mode feature in the Settings and select Enabled.
4. Next up, relaunch the Chrome browser.
5. Up next, go to the address bar in Chrome and head over to the following location:
6. Turn on the switch next to “Memory Saver” and you are all set!
Note that you will need to relaunch the browser to make the change come into effect. That’s done! From now onwards, Google Chrome will not capture RAM and CPU unnecessarily. Hence, the browser will always work faster and with the desired smoothness.
Turn OFF Energy Saver in Chrome on Mac and Windows
At any time, you want to disable the energy saver due to any personal reason, you can do that without any pain.
1. To get going, launch Chrome on your computer.
2. Then, paste the below-given address in the address bar to access the Chrome Flags:
3. After that, click on the drop-down menu that appears next to Enable the High-Efficiency Mode feature in Settings and select Enabled.
4. Next, relaunch the Chrome browser.
5. Go to the address bar in Chrome and paste the following address.
6. Finally, turn off the switch for “Memory Saver” and relaunch the browser.
Prevent Chrome from Gobbling Up RAM and CPU Usage on Your Computer
That’s all there is to activating the memory saver in Chrome to cut down RAM and CPU usage on your macOS and Windows device. Having thoroughly tested this feature, I can vouch for its effectiveness.
Thus, you can rely on it to let you free up the much-needed memory to not only stop the browser from being sluggish but also slow down your system. With that said, let us know your thoughts about this all-new feature and whether or not you have found it up to the mark.